SG6324-ACB is a layer 3 Ethernet switch, which can meet the needs of cost-effective Gigabit access and 10 Gigabit uplink for enterprise networks and operator customers. SG6324-ACB uses a high-performance low-power network
processor, provides Gigabit line-speed forwarding performance, supports green Ethernet line sleep capability, has the lowest power consumption of the same-level equipment in the industry, supports powerful QoS and ACL functions, and supports IP+MAC+ Security features such as port binding support service flow classification and packet priority marking. Support static data packet sampling, SFLOW function, support multi-port mirroring analysis function, support static and flexible QinQ function, support Ethernet OAM 802.3ag (CFM), 802.3ah (EFM), support strategy-based IPV4/6 unicast routing, support Flexible forwarding strategy。
Carrier-level equipment stability
Perfect safety mechanism
Powerful QoS capabilities
Enhanced multi-service capabilities
| Hardware specifications | |
| Attributes | SG6324-ACB |
| port | 24*10/100/1000M Base-T, 4*1000M Base-X SFP/10GE SFP+ |
| switching capacity | 128Gbps |
| Packet forwarding rate | 95Mbps |
| MAC | 16K |
| multicast | 1K |
| routing | 512 |
| memory and storage | Memory: 512MB, Storage: 32MB |
| power | AC: 100~240V 47/63Hz; DC: 36V~75V; ≤22W |
| Power consumption | ≤22W |
| weight | ≤3kg |
| Dimensions (width * height * depth) | 440*210*44mm |
| Operating temperature | -10℃~55℃ |
| Operating temperature | -40℃~70℃ |
| Software specifications | |
| VLAN | Support 4K VLAN |
| Supports port, MAC and protocol based VLANs | |
| Supports dual-tagged VLAN, port-based static QinQ and scalable QinQ | |
| MAC | 16K Mac addresses |
| Support static MAC address settings | |
| Support blackhole MAC address filtering | |
| Support port MAC address restriction | |
| ring network protocol | Support STP/RSTP/MSTP |
| Support ERPS Ethernet ring protection protocol | |
| Support loopback detection port loopback detection | |
| Port control | Support bidirectional bandwidth control |
| Support port storm suppression | |
| Supports 9K jumbo jumbo frame forwarding | |
| port aggregation | Support static link aggregation |
| Support dynamic LACP | |
| Each aggregation group supports up to 8 ports | |
| mirror | Support port mirroring |
| Support stream mirroring | |
| ACL | Supports standard and extended ACLs |
| Support ACL policy based on time period | |
| Based on IP header information such as source/destination MAC address, VLAN, 802.1p, ToS | |
| Information, such as source/destination MAC address, VLAN, 802.1p, ToS, DSCP, source/destination IP address, L4 port number, protocol type, etc., | |
| DSCP, source/destination IP address, L4 port number, protocol type, etc. | |
| QoS | Support flow rate limiting function based on custom business flows |
| Supports mirroring and redirection functions based on custom business flows | |
| Supports priority marking based on custom service flows, supports 802.1P, | |
| Support port-based priority scheduling function, | |
| Supports queue scheduling algorithms such as SP/WRR/SP+WRR | |
| Safety | Support user hierarchical management and password protection |
| Supports IEEE 802.1X authentication | |
| Support Radius&TACACS+ authentication | |
| Supports MAC address learning restrictions and blackhole MAC function | |
| Support port isolation | |
| Support broadcast message rate suppression | |
| Support IP source protection, support ARP flooding suppression and ARP | |
| spoof protection | |
| Supports DOS attack and virus attack protection | |
| the third floor | Support ARP learning and aging |
| Support static routing | |
| Support dynamic routing RIP/OSPF/BGP/ISIS | |
| Support VRRP | |
| System Management | CLI, Telnet, WEB, SNMP V1/V2/V3, SSH2.0 |
| Support FTP, TFTP file upload and download | |
| Support RMON | |
| Support SNTP | |
| Support system work log | |
| Supports LLDP Neighbor Device Discovery Protocol | |
| Support 802.3ah Ethernet OAM | |
| Support RFC 3164 system log | |
| Supports Ping and Traceroute | |